Unsaturated Resin + Curing Agent + Accelerator + Color Paste Mixing Bar Workshop Shop Rod Blank Shop Demolition Workshop Sheet Shop Workshop - Slab Special Buckle Shop Polish Shop Finished Shop A, Bar Production Process: B , sheet material production process: The role and standard of the blank selection: The non-conforming product is excluded in the next process 1 Blank thickness according to the company's requirements for the species: rod ± 0.2mm for genuine, board ± 0.1mm for genuine (qualified products ) More than waste. 2 Colors, patterns change, do not meet the requirements of the species as waste. 3 models do poorly, rotten edges, pull heart, steam bubbles are waste. The production requirements and standards of the deduction workshop 1 The shape and the sample are the same, including the size of the fine edge buckle, the surface back curvature, and so on. 2 Inspection standards, the following phenomena are waste: a, pinhole eye: the eye of the needle breaks, cracks, the eyehole is not in the center of the button, the four hole position is not square, the eyelet is not perpendicular to the buckle surface, after the broken needle, there are few holes or The needle was not penetrated, the front was large and small, the dark eyes were buckled, the edges of the hole were fried, and there was no hole. b. Buckle: One side is thick and one side is thin; the overall thickness of the button is correct, while one side is thick and one side is thin. c.Compared with the sample buckle, the overall thickness is thicker or thinner in the overall button and four buttons are thick and thin when the machine is turned. E. Acceptance criteria for finished products a) Finished product standards
Want to learn more about buttons: accessible
Men'S Jacket,Leather Jacket For Men,Mens Puffer Jacket,Winter Jackets For Men
Changzhou Xinzhi Chain Information Technology Co.Ltd , https://www.czczxzlkj.com